User's Manual

41
Troubleshooting
TRACKING
PROBLEM CAUSE SOLUTION
ThePIXIOrobotdoesnotstarttrackingwhereas
the watch LED blinks irregularly.
Therobot,thewatch,andthebeaconscannot
starttheirradiocommunicationscorrectly.
Placetherobotandthebeaconsfollowingthe
instructionspage12«Micro-beaconslocation»
andstartagainthesystem.
If the tracking does not start after about 20
seconds, you can help by holding the watch
above your head a few seconds. As soon as
the tracking starts, you can put your hand
down.
ThePIXIOrobotdoesnotstarttrackingwhereas
the watch LED blinks regularly.
Thewatchstartsontheupgrademode.
TurnONthewatchbypressingthebuttonuntil
thegreenlightturnsONthereleasethebutton
immediately.
ThePIXIOrobotdoesnotstarttrackingwhereas
the green and red lights of the robot are
blinkingalternately.
Therobotisaslave(refertopage25).
When OFF, press the ON/OFF button of the
robot during 13 seconds (until the green light
blinksalone).
ThePIXIOrobotdoesnotstarttrackingwhereas
a beacon LED blinks regularly.
Thebeaconstartsontheupgrademode.
Turn ON the beacon by pressing the button
until the green light turns ON the release the
buttonimmediately.
The PIXIO robot rotations are always in the
wrongdirectionofrotation.
Thebeaconsarenotplacedcorrectly.
The beacon n°2 must be on the left of the
beaconn°1,asseenfromtherobot.Followthe
instructionsgivenpage12«Microbeaconsset-
up»andstartagainthesystem.
Sometimes,therobotisshaky,and/ortoolate.
Distances are too long, and/or an external
elementisperturbatingthesystem.
Place the beacons and the robot following
theinstructionsgivenpage12«Micro-beacons
location»andstartagainthesystem.
WerecommendthatyouregularlyupdatePIXIOrmwaretoenhancePIXIObehaviour.
Refertothecompleteupdateprocedurepage30.
NOTICE