User's Manual

42
TRACKING
PROBLEM CAUSE SOLUTION
The PIXIO works well at short range but
malfunctionsatlongrange
Theradiocommunicationmalfunctions
1.Verifythatthebeaconsarenotplacedon
theground.Thebeaconsmustbesettledat1m
to2mfromtheground.
2.Placetherobotandthebeaconsfollowing
the instructions page 12 «Micro-beacons
location»andstartagainthesystem.
ThePIXIOrobotalwaysfilmsonmyside.
The beacon n°1 was not well at the center
of the frame before starting the watch, and/
or the beacon n°1 was much closer to the
camerathanthewholeareayouwanttofilm,
and/ortherobotisnotscrewedenoughtothe
tripod
1. Re-start the system, checking that the
beaconn°1is well at the center (right-left) of
thecamerascreenbeforestartingthewatch.
Checkthatthedistancebetweenthebeacon
n°1andthecameraissimilartothemaximum
distanceoftheareayouwanttofilm(halfthis
distanceisaminimum).
2.Checkthattherobotiswellscrewedtothe
tripod.
ZOOM / REC
PROBLEM CAUSE SOLUTION
I cannot start recording from the watch and
thezoomisfixed
1.thecameracableisnotproperlyplugged.
2. the robot is not parameterized for your
cameramodel.
1.Replugthecameracableonbothside.
2. Upgrade the camera parameters of your
robot.Seeprocedurepage7
TheRECstopsautomaticallyorthevideoissplit
intomanyshortvideos.
The camera battery is empty or the camera
memoryisfull.
Rechargethecamerabattery.
Format the microSD card with the «setup
menu»ofthecamera.
Formattheinternalmemoryofthecamera(if
applicable).