User's Manual

FIRMWARE UPDATE / SAVE OF THE CAMERA PARAMETERS

PROBLEM CAUSE SOLUTION

I cannot upgrade my system (the red led

remainsON)

ThePIXIOrobotcannotreadthefile.

1. Check that the micro-SD card has been

formattedwithFAT32option.

2.Checkthatthefileisintherootdirectoryof

themicro-SDcardandnotinasub-directory.

3.CheckthatthemicroSDcardisinsertedinto

thePIXIOrobotslot(notinthecamera).

4. Check that the name of the file does not

include any ...(1) or ...(2) at the end of the

name or does not include the file extension

twice(egupdate.mnp.mnp).

Ifso,renamethefileupdate.mnp or update if

yourcomputerdoesnotdisplaytheextension

files.

Icannotnotupgradethecameraparameters.

ThePIXCAM.cfgdoesnotdisappearfrom the

memorycardattheendoftheprocedure.

Therobotcannotreadtheparametersfile.