User's Manual

6
Charging the batteries
Thecompletechargingofeachdevicetakesabout2hours.
PlugtheUSBchargerintothesocketthankstothepowercord.PlugtheUSBcablesontheUSBcharger.
Recharge the PIXIO robot.
PlugoneoftheUSBcablestotheplug«5VDC»atthebackofthePIXIOrobot.ThecorrespondingredLEDlocatednear
thepluglightsupduringtherecharge,andturnsoffwhentherobotischarged.
Toavoidself-dischargeoftherobot,unplugtherobotaftertheendoftherobotcharge,turntherobotONforafew
secondsandthenturnitOFFbeforestoringit.
Recharge the PIXIO micro beacons.
PlugUSBcablesineachoneofthemicrobeaconspluglocatedbehindasshown.TheredLEDofthemicro-beacon
lightsupduringtherecharge,andturnsoffwhenthemicro-beaconischarged.
1
Recharge the PIXIO watch.
PlugthewirelesschargertooneoftheUSBcablesconnectedtotheUSBcharger.Justputthewatchonthewireless
charger.TheredLEDofthewatchlightsupduringtherecharge,andgoesdownwhenthewatchischarged.
1
YoucanalsorechargethePIXIOdeviceswithacomputer.ConnecttheUSBcabletoaUSBportonyourcomputer.
1
Sometimes the red light ashes at the end of the charge. It is not a problem, the item is charged