User's Manual

26
Checkthatalldevices(robot,watchesandbeacons)areOFF.
Press and hold the zoomINbuttonontherobot,thenpressbriey
ReleasethezoomINbuttonwhen the green and red lights blink together.
The robot enters into the pairing mode and the green light ashes twice
intermittently.
Pairthe3beaconsandthethewatchesbystartingthemcloserthan 1 meter
(3ft)fromtherobot.Thegreenlightofthebeaconsandthewatchesblinks4
timesintermittentlyoncethepairingiscompleted
TurnOFFtherobot,thebeaconsandthewatches.
Notes:
Thepairingissavedforfutureuse.
DonotturnOFFtherobotbeforepairingalldevices.
Youmustpairatleastonewatchand3beaconstotherobot.
Youcanaddupto15additionalwatches.
Pairing procedure
Youneedtopairtherobot,thebeaconsandthewatchestogethertouseasinglerobotwithseveralwatches.
1� Press on hold
ZoomIN button
3� Release ZoomIN
button when the
green and red lights
blink together
2� Briefly press POWER
ON