User's Manual

27
Multi watches tracking
All devices must be paired together to be able to run into the MULTI-USER mode.
TurnOFFallwatches.FollowthePIXEMsetupprocedure,untilthebeginningofthetracking.Therobotstartsto
tracktherstwatchON.
Oncethetrackingbegins,turnONtheadditionalwatchesbypressingthe
button.Thegreen light of each
watchstartstoblinkslowly.
press the
buttonofawatchtobetrackedandlmed.Thelightisfull greenwhenthewatchislmed.Stop
recordingbypressingthe
buttonagain.Thegreenlightasheswhenthecameraisnotrecording.
Light OFF
watch OFF
Blinking light
watch ON / record OFF
Light ON
watch ON / record ON