User's Manual

29
Installing a new firmware
Firmwarev3.1isalreadyinstalledonyourPIXEM.Totakeadvantageofthelatest
improvements, install any new rmware version available from: https://shop.
movensee.com/ccc
Werecommendtoupgradealldevices(therobot,thewatchandthe3beacons)
atthesametime.Makesurethatalldevicesarefullychargedbeforestarting
theprocedure.
1. Download the last firmware version
Downloadthelatestrmwareversionathttps://shop.movensee.com/ccc
Savethermwareonamicro-SDcardformattedwiththeFAT32,FAT16orFAT12
format(usually, micro-SD cards with a capacity lower than 32Gb are formatted
with a correct format). The le must be saved in the root directory of the
memorycard,notinasub-directory.Thisleismeanttobeopeneddirectlyon
andbyPIXEM(donottrytoopenitfromyourcomputer).
Check that the name of the le is update.mnp without any ...(1) or ...(2) at
the end of the name.
Insertthemicro-SDcardintherobotslotontherobotside.
Need some help to upgrade your
PIXEM ?
Have a look at the tutorial video:
https://youtu.be/CxnVju8qysw
The micro SD
card goes into
the robot slot