User's Manual

42
RECHARGE
PROBLEM CAUSE SOLUTION
The robot discharges when OFF The robot is self-discharging
Toavoidself-dischargeoftherobot:unplug
therobot afterthe end of the robotcharge,
turntherobotONfewsecondsandthenturn
itOFFbeforestoreit.
FIRMWARE UPDATE
PROBLEM CAUSE SOLUTION
I cannot upgrade my system (the red led
remains ON)
The PIXEM robot cannot read the file�
1� Check that the micro-SD card has been
formatted with FAT32 option�
2� Check that the file is in the root directory of
the micro-SD card and not in a sub-directory�
3� Check that the microSD card is inserted into
the PIXEM robot slot (not in the camera)�
4� Check that the name of the file does not
include any ���(1) or ���(2) at the end of the
name or does not include the file extension
twice (eg update�mnp�mnp)�
If so, rename the file update�mnp or update if
your computer does not display the extension
files�
After an update, the PIXEM malfunctions
You did not updated all the devices (robot,
watch and the 3 beacons)
Update all devices (robot, watch and the 3
beacons)