User's Manual

Setting up the PIXEM

1.Screwtherobotonatripodequippedwithastandard3/8’’screw(check that the

motor is switched off before screwing or unscrewing the device).

2. Screwthe smartphone & tablet holder ontothe robot with the 1/4’’ screwof the

PIXEMrobot.

3.Clip yoursmartphoneor tabletintothe holder.Makesurethat theclipdoes not

pressthebuttonsonthesideofyoursmartphoneortablet.

BeforeusingPIXEMforthersttime,youmustcheckthatthermwareofthe

PIXEMisuptodate(refertopage29)

NOTICE