User's Manual

Thomson/Gyration Confidential Page 9 of 21
E Enter, if supported by the
selected device
Enter
European Addition
Red
Green
Grey
Yellow
Blue
Backlighting
The RCU Mode Selection buttons are backlit. One of these buttons lights up whenever a
button is pressed on the remote to indicate which Control Mode the remote is in; PC or
TV. If the backlighting seems dim, the batteries may need to be replaced. There is no
backlighting on any other buttons.
ON/OFF Switch
This switch turns the selected device on or off. The device is selected with the RCU
Mode Switches; PC and TV.
In the PC mode, this button issues a standard Windows SLEEP command. Various
options for this command can be set up in Windows. Go to Start/Control Panel/Power
Options/Advanced and then set a function for the SLEEP command.
In the default configuration this button is setup to give a STANDBY command. In this
configuration, if the PC is already on, the first button press puts the PC into standby
mode. If the PC is in standby mode, any button pressed on the RCU will wake up the
PC.