User's Manual

Message Service Page 17 of 47

Message Service

Message service is actually a network service. This menu works soundly depending on the type of your SIM card

and the service provided by the network operator. Therefore, please check it before applying such function.

Wirte message

Please have the service center number from the network operator before applying this function. The storage

capacity of SIM card depends on its type.

SMS

Under idle situation, press “information service” button to enter into the mailbox list interface, press [Write

message→New SMS] to enter into the message editor interface, manual input or insert the contacts from the

address list as the recipients, press “send” button to send the messages after editing the contents.

Note: This device supports multi-messaging. Four common SMS are editable at most with each containing 268

Chinese characters or 612 English ones.

Creat a message, pressing“Menu”, you can:

Insert template: Insert template in the cursor position.

Add contact info: Insert in the message a name and its number from the Contacts.

Add phiz symbol: Insert an expression symbol in the cursor position.

Open regular send: Open the regular send function.

Save as draft: Save the edited message in the Draftbox.

MMS

Short for multi-media service, MMS is just a multi-media message, which supports GIF, JPEG, WBMP or BMP

display.

Note:

This function is available only when supported by the network operator. Meanwhile, only thephone compatible to

MMS can receive and display such message.

Under idle situation, press “information service” button to enter into the mailbox list interface, press [Write

message→New MMS] to enter into the MMS editor interface, manual input or insert the contacts from the

address list as the recipients, press “send” button to send the messages after editing the contents or inserting the

attachment.

Creat MMS: Presssing “Menu”, you can:

Delete: Delete the edited text or inserted audio/video.

Save as draft: Save the edited message in the Draftbox

Set slide time: Set the time of the slide.