User's Manual

materials, please obey the sorting rules instituted locally

for this type of waste.

Batteries: Spent batteries must be deposited at the

designated collection points.

The product: The crossed-out waste bin mark affixed to

the product means that it belongs to the family of

electrical and electronic equipment.

To promote the recycling and recovery of waste electrical

and electronic equipment (WEEE) and at the same time

safeguard the environment, European regulations require

you to obey the sorting rules instituted locally for this type

of waste.

1 Getting Started

1.1 Getting to know your touch phone

1.2 Installing the SIM card, battery, and storage card

You need to remove the back cover before you can install

the SIM card and battery. Also, make sure to always turn

off the power before installing or replacing the SIM card

and battery.

To remove the back cover

1. Make sure your device is turned off.

2. Firmly hold the device with both hands and the front

panel facing down.

3. Push the back cover up with your thumbs until it

disengages from the device and then slide it up to remove.

To remove the battery

1. Make sure your device is turned off.

2. Remove the back cover.

3. The bottom of the phone has a notch. Lift the battery by

the notch to remove it.

To install the SIM card

The SIM card contains your phone number, service details,

and phonebook/ message memory. Your device is

supported 2G or 3G (WCDMA) or 4G (FDD) SIM cards.

1. Remove the battery if it is installed.