Operation Manual
Table Of Contents
- SERIAL NUMBER LOCATION
- TABLE OF CONTENTS
- SAFETY PRECAUTIONS
- NAMES OF PARTS
- NOZZLES
- CONTROL PANEL
- INSTALLATION
- INITIAL SETTINGS
- OPERATION
- COOL MODE
- FAN ONLY MODE
- SCHEDULE MODE
- STARTING SCHEDULE MODE OPERATION
- STOPPING SCHEDULE MODE OPERATION
- TEMPORARY STOP DURING SCHEDULE MODE
- SETTING / EDITING / VIEWING SCHEDULE
- CLEARING SCHEDULE
- ADJUSTING BRIGHTNESS
- FAN MODE
- CHANGING TEMPERATURE SCALE
- KEY LOCK
- KEY UNLOCK
- TEMPORARY STOP DURING KEY LOCK
- SERVICE INFORMATION
- SELF-DIAGNOSTIC CODES
- LIST OF SELF-DIAGNOSTIC CODES
- EMPTYING THE DRAIN TANK
- CONDENSATE PUMP KIT (OPTIONAL ACCESSORY)
- MAINTENANCE
- TECHNICAL SPECIFICATIONS
- TROUBLESHOOTING
- WARRANTY STATEMENT
- DATA PRIVACY DISCLOSURE
17
MOVING NOZZLES FROM TOP TO FRONT
WARNING
Disconnect power before installation. Beware that some residual voltage may remain in the
unit a er the power is disconnected. There is a risk of electric shock.
1. Turn the unit o and unplug the power cord.
2. Remove the two nozzles by rotating
counterclockwise.
3. Take out the six (6) truss screws, and then
remove the changeable panel.
Note:
Retain the screws for installing the panel on the
top.
4. Take out the six (6) countersunk screws, and
then remove the nozzle adapter.
Note:
Retain the screws for installing the panel to the
front side.
Truss screws (6)
Changeable Panel
Coun
tersunk screws (6)
Nozzle Adapter
CAUTION
Do not drop screws or dust into the top opening. This may cause malfunction.
Do not operate the unit until the last step is completed.