Operation Manual
Table Of Contents
- SERIAL NUMBER LOCATION
- TABLE OF CONTENTS
- SAFETY PRECAUTIONS
- NAMES OF PARTS
- NOZZLES
- CONTROL PANEL
- INSTALLATION
- INITIAL SETTINGS
- OPERATION
- COOL MODE
- FAN ONLY MODE
- SCHEDULE MODE
- STARTING SCHEDULE MODE OPERATION
- STOPPING SCHEDULE MODE OPERATION
- TEMPORARY STOP DURING SCHEDULE MODE
- SETTING / EDITING / VIEWING SCHEDULE
- CLEARING SCHEDULE
- ADJUSTING BRIGHTNESS
- FAN MODE
- CHANGING TEMPERATURE SCALE
- KEY LOCK
- KEY UNLOCK
- TEMPORARY STOP DURING KEY LOCK
- SERVICE INFORMATION
- SELF-DIAGNOSTIC CODES
- LIST OF SELF-DIAGNOSTIC CODES
- EMPTYING THE DRAIN TANK
- CONDENSATE PUMP KIT (OPTIONAL ACCESSORY)
- MAINTENANCE
- TECHNICAL SPECIFICATIONS
- TROUBLESHOOTING
- WARRANTY STATEMENT
- DATA PRIVACY DISCLOSURE
73
CONDENSATE PUMP KIT (OPTIONAL ACCESSORY)
Condensate pump kit is available to allow continuous unit operation and eliminate the need for
emptying the drain tank.
Note:
The compressor does not operate while the condensate pump is discharging the water
from the reservoir.
If a failure occurs, the unit automatically stops and the LCD displays PU.
Follow the on-screen instructions.
For optimal performance of condensate pump, follow these instructions:
1. Remove any dirt or debris from the bo om of the reservoir tank.
2. On a monthly basis, check the condensate drain hose for kinks, blockage or any other damage
that may prevent the unit from draining properly.
3. Always replace the fan motor cover to keep electrical parts free of dust, dirt and any other
foreign material.
Condensate Pump Reservoir
Motor Cover
WARNING
CAUTION
For installation of the condensate pump, consult your MovinCool dealer or qualified
technician. Incorrect installation may cause fire, electric shock or water leaks.
When performing maintenance or troubleshooting, stop the operation and turn off the
breaker to avoid causing possible electric shock or injury.
Ensure smooth drainage through the hose. If the hose is clogged, it may cause malfunction
and property damage due to water leaks.