Operation Manual

78
TROUBLESHOOTING
Review the following before calling your MovinCool dealer or qualifi ed technician.
PROBLEM POSSIBLE CAUSE SOLUTION
Unit does
not operate
No display on
LCD screen
Unit is not connected to power
supply
Check connection to mains
supply. Try plugging it in
Main power is o Check circuit breaker is on
Ground fault protective
breaker is tripped
Reset ground fault protective
breaker
LCDI power cord is tripped Reset power cord
LCDI power cord is damaged Replace power cord
LCD displays
normally, but
unit does not
start
Ambient temperature has
reached set temperature and
unit has stopped
Adjust set temperature
Poor cooling performance
Air inlets or outlets are
blocked
Keep a minimum clearance of
18 inches (457 mm) from walls or
other objects
Air fi lters are dirty Clean air fi lters
Temperature se ing is too
high
Adjust temperature se ing
Water leaking from unit
Tank is not correctly installed Position tank
Tank inlet is clogged Unclog tank inlet
Drain hose has a kink or is
blocked
Check and clean drain hose