User`s guide

9
For further information please refer to section 3.3 of the user’s manual on the advanced settings CD.
Connect the yellow Ethernet cable (6) to
the Ethernet card on the PC and to one of
the router’s connectors labelled as Eth1
to Eth4
Switch the PC on. The ETHERNET
indicator will light up in green after a few
seconds. This led will blink when transfe-
rring data.
Power Ethernet Wifi 3G ADSL Internet
B. Connection using Ethernet cable
ADSL
Reset
Eth1Eth2Eth3Eth4
USB
Wifi
Power
ON/OFF
12V 1A
ADSL
Reset
Eth1Eth2Eth3Eth4
USB
Wifi
Power
ON/OFF
12V 1A
6
6