User`s manual

User’s Guide Configuring your Computers
108
6. If the device PCB and the WPS handshake is successfully
done on the station side, User’s Wi-Fi Protected status will
be shown as below.
Other pages such as Wireless Basic Settings page and
Wireless Security Setup page will also be updated appropriately
as described in previous sections. In this case, AP is in un-
configured state before the station initiates the WPS
handshake. According to the WPS spec, AP will create a
wireless profile with WPA2-mixed mode and a random-
generated key upon successfully doing the WPS handshake.
However, AP will use the original wireless profile and give it to
the station if AP is already in configured state. That means all
settings of AP will not change. Hence, all WPS related pages
keep the same.