User's Manual

3. You will hear the voice announcement “loading phone book successful” with
 nishing download.
4. Then, handsfree will connect with your phone automatically.
THE PROCESS OF PHONEBOOK DOWNLOADS MANUALLY
[Note] This function is to update handsfree’s phonebook.
1. After connect MK70 with your phone, press FM button for 2 seconds.
2. If your mobile supports PBAP, the phone automatically disconnect with your
phone.
3. Handsfree is automatically reconnected with the voice announcement “loading
phone book”, and starting download phone book. (If you can hear a beep sound
instead of the voice “loading phone book”, it is failed to download phonebook.)
4. You will hear the voice announcement “loading phone book successful” with
 nishing download.
5. Then, handsfree will connect with your phone automatically.
[Note] Stopping phonebook downloads: Phonebook download takes some seconds depending on
your mobile. To stop download phonebook, press the FM button.
(It takes about 15sec at least from starting download phone book)
AUTOMATIC CONNECTION: Handsfree supports auto connection that makes it
possible to be automatically connected to the last
connected device after turning on.
EASY PAIRING: Handsfree goes into the Pairing Mode automatically when it is
turned on for the  rst time.
[Note] If you want to go to “pairing mode” manually, at  rst, make handsfree stand by state
(not connected with your phone), and press Multi-Function button for about 4sec until
you hear a beep sound.
SIMPLE PAIRING: You can pair handsfree with your mobile phone without entering
the pin number (0000), if your mobile phone supports Bluetooth version 2.1.
MAKING A CALL
1. Last call-Redialing
Press the Multi-Function button[
].
2. Voice Dialing
Press the Multi-Function button[
] for 2 seconds until you hear a beep sound,
then voice dialing is activated on handsfree. If you want to cancel voice dialing,
press the Multi-Function button[
] during the voice dial Mode.
[Note] Please make sure that your phone supports the Voice Recognition  rst. (See your phone’s
manual for detailed instructions)
RECEIVING A CALL
You can hear the ring tones with the caller name from handsfree.
Press the Multi-Function button[
] to receive call.
REJECTING A CALL
Press the Multi-Function button[
] for 2 seconds.
ENDING A CALL
Press the Multi-Function button[
] during the call or just press the “End” button
on the phone.
TRANSFERRING A CALL
To transfer a call from handsfree to your mobile phone and vice versa, press the
Multi-Function button[
] on handsfree during the call for 2 seconds until you
hear a beep.
ADJUSTING A VOLUME
You can adjust the volume by pressing the volume up (+) or down (-) button
during the call or incoming calls.
[Note] In FM mode, volume control is only available from your car audio.
[Note]TTS volume can be changed during hearing TTS announcement, and will be adjusted from
the next voice announcement.
-3- -4-
English English