User's Manual

you have an incoming call. When a call is ended, it will start to play again.
[Note] The auto connection between calling and playing music depends on the user’s phone.
FULL NAME TTS(TEXT TO SPEECH) via PHONE BOOK DOWNLOADING
Handsfree automatically will start downloading process when it is paired with
mobile phone. When incoming call, handsfree will announce the Caller’s Name.
[Note] For activating the name TTS, you should download the phone book from your phone book  rst.
[Note]For deactivating or activating the TTS function, press and hold Multi-function and volume
down (-) until you hear a beep (about 2 seconds). You can also use this function by pressing
just volume down (-) until you hear a beep (about 2 seconds) when handsfree is in incoming call.
VOICE ANNOUNCEMENT
Handsfree gives out voice announcements to inform you the device’s status(e.g.
power ON/OFF, pairing, FM mode, and etc). Handsfree has 10 di erent voice
announcement languages. The basic option is UK English.
1. UK English 2. US English 3. French 4. Italian 5. German 6. Spanish
7.
Mexican Spanish 8. Brazilian Portuguese 9. Mandarin Chinese 10. Russian
Please refer to the following steps to change a language.
1. Set handsfree in “pairing mode”
2. Press FM button about 2 seconds, then you can hear the con gured language.
3. Press volume up (+) or down(-) button to  nd a new language.
4. Select preferred language by pressing FM button, then new language will be selected.
5. Then, handsfree automatically return to the “paring mode”
USING FM TRANSMITTER
The FM transmitter allows you to transmit calls and music from your mobile to the
car stereo when the Hands-Free Unit and car radio are having the same frequency.
1. First, please connect your mobile phone with handsfree.
2. Simply press the FM button. Then the FM status icon will turn on and the
available FM frequency will be announced.
MIKE MUTE
If you press the volume down (-) button for 2 seconds, the microphone is muted.
You can hear a beep every 10 seconds during the mute mode.
[Note] The MIC mute mode can be deactivated by pressing volume down (-) button for 2 seconds again.
CALL WAITING
To activate call waiting function, you must subscribe to call waiting through your
service provider, and your phone must support the hands-free pro le.
1. To put your current call on hold and switch to the waiting call, press and hold
volume up (+) until you hear 2 long beeps. (about 4 seconds) When you release
the button, you’ll be connected to the waiting call. When you want to switch back
to the current call, press and hold volume up again for 4 seconds.
2. To hang up your current call and switch to the waiting call, press and hold
volume down (-) until you hear 2 long beeps. (about 4 seconds) When you release
the button, you’ll be connected to the waiting call.
[Recommended] Press the “SEND” button of your mobile phone to activate the call waiting function.
[Note] Some features may not be compatible with certain mobile.
RESETTING THE HANDS-FREE
If you are having some trouble with handsfree or you want to delete all your in-
formation (paired device information, volume level, etc.), reset it. Press and hold
Multi-function and volume down (-) until you hear a beep (about 4 seconds).
Then turn o and turn on handsfree.
[Note] Resetting is only possible when standby mode after disconnecting with your mobile phone.
SPECIAL FEATURES
Play Music
Make sure that handsfree and your mobile should be connected each other before
playing music. When you play music in your mobile phone, it will automatically
transfer the music to your handsfree. Music will automatically be paused when
-5- -6-
English English