BluePin II Instruction Manual i120 Please read this manual carefully before operating and save it for future reference. Have a question? Please visit http://www.i-Luv.
BluePin II V10M10_IM_EN_10302007 -1- www.i-Luv.
BluePin II V10M10_IM_EN_10302007 USER SAFETY GUIDE INSTRUCTIONS ON ENVIRONMENT PROTECTION Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packaging will inform about the methods of disposal. The materials are recyclable as mentioned in its marking.
BluePin II V10M10_IM_EN_10302007 Important Safety Instructions-Continued sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 7. Power sources – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 8. Cleaning – The appliance should be cleaned with a dry cloth. 9.
BluePin II V10M10_IM_EN_10302007 communications, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
BluePin II • V10M10_IM_EN_10302007 Keep this device away from children. This is a small item and may be swallowed by children and result in serious harm. About Electromagnetic Interference (EMI) This device is designed and manufactured not to exceed the exposure limit for radio frequency energy, which is set by the Federal Communications Commission of the U.S government. The term “EMI” is short for the electromagnetic interference caused by the electromagnetic field generated by electronic devices.
BluePin II V10M10_IM_EN_10302007 GETTING STARTED BluePin II Thank you for purchasing the i120 from iLuv. Please keep this manual in a safe place for future reference. • Turns its host player into a Bluetooth system -6- www.i-Luv.
BluePin II • • • • • • • • • V10M10_IM_EN_10302007 Answer or make a phone call wirelessly when Bluetooth mobile phone is paired. Pair BluePin II with Bluetooth-enabled music player and listen to your favorite music from your host system. Control your music on the paired device with the remote control of the BluePin II host system. Pair with Bluetooth stereo headset for wireless listening experience. Control the BluePin host system with the remote control of the paired headset.
BluePin II V10M10_IM_EN_10302007 without the need to face each other or the concern of interference from other wireless communication within its optimum range of 300 feet. Through a process called “Pairing,” two or more devices with Bluetooth wireless technology can interact with each other without interference from other wireless platforms nearby, including other Bluetooth wireless communications between unrelated devices. GETTING STARTED -8- www.i-Luv.
BluePin II V10M10_IM_EN_10302007 LOCATION OF CONTROLS 1 2 3 4 5 1. 2. 3. 4. 5. SEND (TX) Indicator light RCV (Receive/RX) Indicator light SEND/RCV Button PAIRING Button 10pin Connector OPERATING INSTRUCTIONS Operating the BluePin II -9- www.i-Luv.
BluePin II V10M10_IM_EN_10302007 The i120 has no independent power source (battery) and must be connected to an iLuv device in order to operate. Pairing in TX (Send) Mode 1. Connect the i120 to the 10pin connector on your iLuv audio device. 2. Press the SEND/RCV button on the side of the BluePin II until the SEND indicator light shows. 3. Follow the pairing instructions for the device with which you wish to pair the i120 (mobile phone, MP3 player, stereo headset, etc.).
BluePin II V10M10_IM_EN_10302007 2. Press the SEND/RCV button on the side of the BluePin II until the RCV indicator light shows. 3. Follow the pairing instructions for the device with which you wish to pair the i120 (mobile phone, MP3 player, stereo headset, etc.). Note: Your connected device may ask for a PIN code. Enter, “0000” to continue pairing. 4. Press and hold the PAIRING button on the i120 for approximately three (3) seconds until blue and red LED lights blink alternatively around the button.
BluePin II V10M10_IM_EN_10302007 phones. Additionally, your mobile phone must be paired with the i120 before all other pairing. 2. There is interference on the headset with my phone or music playing devices when paired with i120. The maximum distance for Bluetooth wireless communication is 300 feet (Class 1). When this distance is approached, background noise will increase. Also, a poor signal on the mobile phone may contribute to degradation the quality of sound as well. 3.
BluePin II V10M10_IM_EN_10302007 - 13 - www.i-Luv.
TEL: 516-626-7188 FAX: 516-626-7105 website: www.i-Luv.com iLuv is a trademark of jWIN Electronics Corp. Features and specifications are subject to change without prior notification. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by jWIN Electronics Corp. is under license. © 2007 jWIN Electronics Corp. All rights reserved.