User Manual WIRELESS HEADSET MF620
What’s in the box? Bluetooth Headset Ear Hook AC Adapter Ear Rubber User manual Getting to know the MF620 Indication LED Multi-Function Button Ear Rubber Volume Button Microphone Charging port Speaker Using your Headset TURNING ON/ OFF Turning On : Press the Multi-Function button for 2 seconds. Turning Off : Press the Multi-Function button for 4 seconds.
2 sec. Turning On 4 sec. Turning Off CHARGE THE BATTERY Before using your headset, charge the battery completely. Connect an adapter to the charging port of the headset and plug it into home power outlet. The Red LED remains on while the headset is charging and LED turns off when charging is completed. [NOTE] Please use supplied power adaptor only. CHECKING THE BATTERY LEVEL Press the Volume button for 4 seconds, then the headset will announces the Battery level.
PAIR THE HEADSET TO YOUR MOBILE PHONE 1. Turn the headset on. When turned on for the first time, headset will go to pairing mode automatically. (LED will blink Blue and Red) Or Press the Multi-Function buttons for 4 seconds until LED blink as Blue and Red. 2. Search the headset via your mobile phone and confirm it when the connection confirmation message appears on your mobile phone. PIN code is “0000” .
EASY PAIRING : The headset goes into pairing (proximity pairing) mode automatically the first time you use it. MAKING A CALL 1. Last call-Redialing : Press the Multi-Function button. 2. Voice Dialing : Press the Multi-Function button for 2 seconds, then voice dialing is activated. If you want to cancel voice dialing, press the Multi-Function button for 2 second during the voice dial Mode. [NOTE] Please make sure that your phone supports voice dialing feature.
TRANSFERRING A CALL To transfer a call from headset to your mobile phone and vice versa, press the Multi-Function button on headset during the call for 2 seconds. ADJUSTING A VOLUME There are 6 volume levels that cycle as you press the Volume button. When the highest level is reached, you can hear the beep. Press the Volume button again, the volume level cycles back down to the lowest.
MULTIPOINT : Using the Headset with two phones [NOTE] Some mobile phones are not available for Multipoint. 1. Multi-point Connect Set the headset into pairing mode first. After then search headset from each mobile phones at the same time. Please connect first mobile phone. Once the connection is completed, please connect the second mobile phones. [NOTE] Some mobile phones needs to connection process at the same time 2.
RESETTING THE Headset Press and hold Multi-Function button and volume button simultaneously for 4 seconds then all information in headset will be deleted. [NOTE] Resetting is only possible when standby mode after disconnecting with your mobile phone. Status indication Status Power on Pairing mode Connectable Connected Incoming call Active Call Low Battery Battery Level LED indication Blue LED blinks 3 times. Blue & Red LED blink repeatedly.
Specifications Model Name Bluetooth Core Spec Profile Carrier Frequency Modulation Method Maximum Data Rate Bluetooth Class Hopping Transmit Power Coverage Range Receiver Sensitivity Continuous Talk Time Standby Time Weight Dimension Charging Voltage Charging Time Operating Temperature Storage Temperature Battery MF620 Bluetooth Specification 3.0 HSP/HFP 1.5 2402 MHz to 2480 MHz GFSK, 1Mbps, 0.5BT Gaussian Asynchronous : 723.2 kbps / 57.6 kbps Synchronous : 433.9 kbps / 433.
SAFETY AND GENERAL INFORMATION 1. Please read this guidebook carefully and follow the instruction. 2. To avoid any damage or malfunction of the unit, do not drop it from high place. 3. Keep away unit from humidity, water and any other liquid. And if the unit is exposed by water, moisture and other liquid directly, then do not operate it normally to avoid any electrical shock, explosion and damage of the unit. 4.
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
EU This product is CE marked according to the provision of the R&TTE Directive (99/5/EC). Here by MOVON Corporation, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Please note that this product uses radio frequency bands not harmonized within EU.
WEEE SYMBOL INFORMATION Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
