User's Manual
1. Last call-Redialing
Press the Multi-Function button[ ].
2. Voice Dialing
Press the Multi-Function button[ ] for 2 seconds.
Voice Dialing is activated on the phone. If you want to cancel Voice Dialing,
press the Multi-Function button[
] during the Voice Dial Mode.
[Note] Please make sure that your phone supports the Voice Recognition rst(See your phone’s
owner’s manual for detailed instructions)
RECEIVING A CALL
You can hear the ring tones from the unit when incoming call. Press the Multi-
Function button[
] to receive call.
REJECTING A CALL
Press the Multi-Function button[
] for 2 seconds.
ENDING A CALL
Press the Multi-Function button[
] during the call or just press the “End” button
on the phone.
TRANSFERRING A CALL
To transfer a call from the unit to your mobile phone and vice versa, press the
Multi-Function button[
] on the Hands-Free Unit during the call for 2 seconds.
ADJUSTING A VOLUME
You can adjust the Volume by pressing the Volume Up(+) or Down(-) button.
MIKE MUTE
If you press the Side Button, the microphone is muted. You can hear a beep every
10 seconds during the mute mode.
[Note] The Mike Mute mode can be deactivated by pressing the Side button shortly.
CALL WAITING
To use this feature, you must subscribe to Call Waiting through your service
provider, and your phone must support the hands-free prole. When another call
comes in while you are talking on the phone, this unit sounds a tone.
1. To put your current call on hold and switch to the waiting call, press and hold
Volume Up(+) for about 3 seconds When you release the button, you’ll be
connected to the waiting call. When you want to switch back to the current
call, press and hold volume up again for 3 seconds.
2. To hang up your current call and switch to the waiting call, press and hold
Volume Down(-) for about 2 seconds When you release the button, you’ll be
connected to the waiting call.
[Recommended] Press the “SEND” button of your mobile phone to activate the Call Waiting function.
[Note] Some features may not be compatible with certain mobile phones.
RESETTING THE HANDS-FREE
If you are having some trouble with this unit or you want to delete all your
information(paired device information, etc.), you can reset it. Press and hold
Volume Up(+) and Volume Down(-) for about 3 seconds.
[Note] Resetting is only possible when standby mode after disconnecting with your mobile
phones.
MULTIPOINT
The unit supports simultaneous connection with 2 mobile phones with full
control of each unit.
[Note] This feature may not be compatible with certain mobile phones.
1. Multi-point Connect
Set the unit into the pairing mode rst, and search the unit individually from
2 mobile phones.
Make sure one mobile phone is connected properly to the unit before trying
the other one.
2. Making a call [To use the second mobile phone]
Press the Side button for last call-redialing from the second mobile phone.
-3- -4-
English English