Installation guide

— 4 — — 5 — — 6 —
4. Hardware Installation Procedure
STEP 1: Connect the 12-48 VDC power adaptor to the NPort 6250 and
then plug the power adaptor into a DC outlet.
STEP 2: For first-time configuration, use a cross-over Ethernet cable to
connect the NPort 6250 directly to your computer’s Ethernet
cable. For connecting to a network, use a standard
straight-through Ethernet cable to connect to a hub or switch.
STEP 3: Connect the NPort 6250’s serial port(s) to serial device(s).
Placement Options
The NPort 6250 can be placed flat on a desktop or other horizontal
surface. In addition, you may use the DIN-Rail or Wall Mount options, as
illustrated below.
Wall Mount Din Rail
NPort6250
5. Software Installation Information
The Document & Software CD contains the User’s Manual, NPort Search
Utility, and the PComm Lite Suite. Insert the CD and follow the
on-screen instructions. Please refer to the User’s Manual for additional
details on using the NPort Search Utility and PComm Lite.
6. Pin Assignments and Cable Wiring
RS-232/422/485 Pin Assignments (male DB9)
Pin RS-232
RS-422
4-wire RS-485
2-wire RS-485
1 DCD TxD-(A) ---
2 RXD TxD+(B) ---
3 TXD RxD+(B) Data+(B)
4 DTR RxD-(A) Data-(A)
5 GND GND GND
6 DSR --- ---
7 RTS --- ---
8 CTS --- ---
9 --- --- ---
12345
6789
Two serial cables for connecting the NPort 6150 to a serial device can be
purchased separately. The wiring diagrams for the two cables are shown
below.
CBL-RJ45M9-150: 8-pin RJ45 to male DB9
NPort 6250
9 pins 9 pins
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
RS-232
Device
DCD
TxD
RxD
DSR
GND
DTR
CTS
RTS
Cable Wiring
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Female DB9 Male DB9Male DB9 Female DB9
CBL-RJ45M25-150: 8-pin RJ45 to male DB25
NPort 6250
9 pins 25 pins
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
RS-232
Device
DCD
TxD
RxD
DSR
GND
DTR
CTS
RTS
Cable Wiring
1
2
3
4
5
6
7
8
8
3
2
20
7
6
4
5
Female DB9 Male DB25Male DB9 Female DB25
7. Specifications
LAN
Ethernet: NPort 6250: 10/100 Mbps, RJ45
NPort 6250-S-SC: Single-mode fiber
NPort 6250-M-SC: Multi-mode fiber
Protection: Built-in 1.5 KV magnetic isolation
Serial
No. of ports: 2
Interface: RS-232/422/485 (male DB9)
Serial Communication Parameters
Parity: None, Even, Odd, Space, Mark
Data bits: 5, 6, 7, 8
Stop bit(s): 1, 1.5, 2
Flow control: RTS/CTS, XON/XOFF, DTR/DSR
Speed: 50 bps to 921.6 Kbps
Console Port:
RS-232 (please see the User’s Manual for
detailed operating instructions)
Memory: One SD socket
Software Features
Protocols:
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet,
DNS, SNMP, HTTP, SMTP, HPPTS, SSL,
PPPoE
Utilities:
Windows utility for
Windows98/ME/NT/2000/XP/2003/Vista/XP
x64/2003 x64/Vista x64
Security Protocols: DES/3DES/AES
OS Driver Support
Real COM drivers
:
Windows 95/98/ME/NT/2000/XP/XP
x64/2003/2003 x64/Vista/Vista x64
Real TTY drivers
:
Linux 2.4 and 2.6
Fixed TTY drivers
:
SCO Unix, SCO OpenServer 5, OpenServer 6,
UnixWare 7, UnixWare 2.1, SVR4.2, QNX 4.25,
QNX 6, Solaris 10, FreeBSD 5, FreeBSD 6
Configuration:
Web Console, Serial/Telnet Console, Windows
Utility.
Power Requirements
Power input: 12 to 48 VDC
Mechanical Specifications
Material: \ Aluminum (1mm)
Environment
Operating Temperature: 0-55°C (32 to 131°F), 5 to 95% RH
Storage Temperature: -20 to 85°C (-4 to 185°F), 5 to 95%RH
Regulatory Approvals
EMC: FCC Class A, CE Class A
Safety: UL, CUL, TUV
Copyright © 2007
Moxa Technologies Co., Ltd.
All rights reserved.
Reproduction without permission is prohibited.
Tel: [phone] www.moxa.com
Fax: [phone] [e-mail]