Switch User Manual

EDS-510A Series User’s Manual Featured Functions
3-13
Auto load system configurations when system boots up
Setting Description Factory Default
Enable
Enables Auto load system configurations when
system boots up
Disable
Disables Auto load system configurations when
system boots up
Enable
Save the current configurations to ABC
To export the current configuration file of the EDS-510A, click on Save to save it to the ABC.
Load the ABC’s configurations to the Switch
To import the configuration file of the EDS-510A, click on Load to load it to the Switch.
Restart
Click “Activate” to reboot the EDS-510A.
Factory Default
The Factory Default function is included to give users a quick way of restoring EDS-510A’s
configuration settings to their factory default values. This function is available in the Console
utility (serial or Telnet), and Web Browser interface.
NOTE
After activating the Factory Default function, you will need to use the default network settings to
re-establish a web-browser or Telnet connection with your EDS-510A.
Using Port Trunking
Link Aggregation allows one or more links to be aggregated together to form a Link Aggregation
Group. A MAC client can treat Link Aggregation Groups as if they were a single link.
The EDS-510A’s Port Trunking feature allows devices to communicate by aggregating up to 4
trunk groups, with a maximum of 8 ports for each group (due to the interface limitation, there is a
limit of 3 gigabit ports or 7 10/100 Mbps ports for each Trk trunk group). If one of the 8 ports fails,