User`s manual

EDS-828 Series Featured Functions
3-44
Configuring 802.1Q VLAN
VLAN Port Settings
To configure the EDS-828’s VLANs, use the VLAN Port Setting page to configure the ports.
Management VLAN ID
Setting Description Factory Default
VLAN ID ranges from 1
to 4094
Set the management VLAN of this EDS-828 1
Enable GVRP
Setting Description Factory Default
Enable/Disable Select the option to enable/disable the GVRP function Enable
Port Type
Setting Description Factory Default
Access This port type is used to connect single devices without tags. Access
Trunk Select “Trunk” port type to connect another 802.1Q VLAN
aware switch or another LAN that combines tagged and/or
untagged devices and/or other switches/hubs.
ATTENTION
For communication redundancy in the VLAN environment, set “Redundant Port,” “Coupling Port,” and
“Coupling Control Port” as “Trunk Port,” since these ports act as the “backbone” to transmit all packets of
different VLANs to different EDS-828 units.
Port PVID
Setting Description Factory Default
VID range from 1 to
4094
Set the port default VLAN ID for untagged devices that connect
to the port.
1