User`s manual

2
2. Getting Started
This chapter explains how to access the EDS-828 for the first time. There are three ways to access the switch:
serial console, Telnet console, and web browser. The serial console connection method, which requires using a
short serial cable to connect the EDS-828 to a PC’s COM port, can be used if you do not know the EDS-828’s IP
address. The Telnet console and web browser connection methods can be used to access the EDS-828 over an
Ethernet LAN, or over the Internet.
The following topics are covered in this chapter:

RS-232 Console Configuration (115200, None, 8, 1, VT100)

Configuration by Telnet Console

Configuration by Web Browser

Disabling Telnet and Browser Access