User`s guide

Industrial Protocols PROFINET I/O
3-8
2
On
2
Port Link State
ro
0
Unavailable
1
Link is up
2
Link is down
3
Port Speed
ro
0
Unavailable
1
10
2
100
3
1000
4
Port duplex
ro
0
Unavailable
1
Half
2
Full
5
Port Auto-negotiation
ro
0
Unavailable
1
Off
2
On
6
Port flow control
ro
0
Unavailable
1
Off
2
On
7
Port MDI/MDIX
ro
0
Unavailable
1
MDI
2
MDIX
Step 7 Integration
Overview of Operation Procedure
The following steps show how to integrate the switch into a PROFINET network:
1. Enable PROFINET on the switch
Enable PROFIENT in switch web UI or by CLI commands
2. Create a PROFINET I/O subnet project in STEP 7
Create a PROFINET I/O Ethernet project for deploying environment
3. GSD file installation
Import MOXA switch GSD into the project
4. Device configuration
Search and discover the switch in STEP 7. Configure PROFINET attributes such as IP address, device name
and I/O parameters.
5. Save and load the project into the PLC
Load this project and into the PLC
6. Monitoring the Switch
Use STEP 7 to monitor switch attributes