User`s manual

IA260/IA261/IA262/EM-2260 Linux User’s Manual Programmer’s Guide
int get_din_event(int diport, int *mode, long int *duration)
Description: To retrieve the DIN event configuration, including mode
(DIN_EVENT_HIGH_TO_LOW or DIN_EVENT_LOW_TO_HIGH), and the value of
“duration.”
Input: int diport - which DIN port you want to retrieve.
- The port whose din event setting we wish to retrieve
int *mode - save which event is set.
unsigned long *duration - the duration of the DIN port is kept in high or low state.
- return to the current duration value of diport
Output: mode DIN_EVENT_HIGH_TO_LOW
(1): from high to low
DIN_EVENT_LOW_TO_HIGH(0): from low to high
DIN_EVENT_CLEAR(-1): clear this event
duration The value of duration should be 0 or 40 <= duration
<= 3600000 milliseconds.
Return: reference the error code.
Special Note
Don’t forget to link the library libmoxalib for DI/DO programming, and also include the header
file moxadevice.h. The DI/DO library only can be used by one program at a time.
Examples
DIO Program Source Code File Example
File Name: tdio.c
Description: The program indicates to connect DO1 to DI1, change the digital output state to high
or low by manual input, then detect and count the state changed events from DI1.
#include <stdio.h>
#include <stdlib.h>
#include <moxadevice.h>
#include <fcntl.h>
#ifdef DEBUG
#define dbg_printf(x...) printf(x)
#else
#define dbg_printf(x...)
#endif
#define MIN_DURATION 40
static char *DataString[2]={"Low ", "High "};
static void hightolowevent(int diport)
{
printf("\nDIN port %d high to low.\n", diport);
6-10