User`s manual

Software Installation
Intellio C320Turbo User's Manual 3-5
l Non-sequential Port Mapping: (Disable “Auto Enumerating COM number”)
Specify the COM number for individual port. For instance, the second port
can be out of sequence, say COM18, while the first port is mapped to
COM10.
In “Individual Port Setting” dialog, you may click on [Advanced Setting] button
to tune the advanced features, “UART FIFO” and “Transmission Mode”, for
each port for particular performance requirements.
Note ! You may skip the following settings and go directly to the next step 8 if
you do not require any particular performance tuning for the driver.
In the “Advanced Settings” dialog, you may customize the driver with the
following two features:
l UART FIFO
Enable: You can set this feature to “Enable” (default) and gain best
performance for the board.
Disable: You can set this feature to “Disable” to avoid from data loss when
communicating with communication devices using S/W flow control.