User`s manual

Software Installation
Intellio C320Turbo User's Manual 3-23
2. Press PageDown to enter “getty Setting” sub-dialog, there are some noticeable
fields for initialize the port for getty usage. You may skip this step if you will not
use getty utility.
Non-Modem and Modem Baud Rate
This field stands for the initial baud rate symbol and hunt sequence for Non-
Modem /Modem tty. It is simply for setting parameters of getty entries in system
file /etc/inittab which could also be manually modified by system administrator.
Its value comes from the UNIX system “getty default” file, i.e., “/etc/gettydefs”.
Modify this field to suit your need.
In some cases, you may need to modify the “getty default” file as well. For
example, in some UNIXs, the “9600” symbol indicated 8-data-bit no-parity while
in others it may stand for 7-data-bit, even-parity. So, please examine the “getty
default” file carefully, and make sure the terminal settings is the same. Otherwise,
garbled data will be inevitable.