User`s manual

About This Manual
This manual is composed of six Chapters and one Appendix. This manual is written for installer, system
administrator and software programmer.
If you are a first-time installer and system administrator, we recommend you to go through the whole
manual except Chapter 4.
If you are a software programmer, you may refer to Chapter 4 “Serial Programming Tools ”.
If you need cable wiring information, please see Chapter 5 “Connection Option and Cable Wiring”.
If you encounter any problem during installation, please refer to Chapter 6 “Troubleshooting”.
+ In this manual, C320Turbo Series refers to C320Turbo and C320Turbo/PCI.
Chapter 1 Introduction
Overview and features for C320Turbo are described. Also check list and overall installation guide.
Chapter 2 Hardware Installation
Hardware installation for C320Turbo.
Chapter 3 Software Installation
This Chapter details the software installation, configuration, driver loading/unloading, driver upgrade
and removal for various operating systems: Windows NT, Windows 95/98, UNIX, DOS and Windows
3.x..
Chapter 4 Serial Programming Tools
This Chapter roughly describes the programming tools for various O.S. platforms, including PComm
under Windows NT, Windows 95/98 and standard UNIX system calls.
Chapter 5 Connection Option and Cable Wiring
This Chapter describes the RS-232/422 cable wiring for the connection options.
Chapter 6 Troubleshooting
This Chapter describes the problems and possible answers for C320Turbo.
Appendix Technical Reference
Specification details, Dual-ported RAM and UART, are described