User`s manual

Software Installation
Intellio C218Turbo User's Manual 3-23
In some cases, you may need to modify the “getty default” file as well. For
example, in some UNIXs, the “9600” symbol indicated 8-data-bit no-parity while
in others it may stand for 7-data-bit, even-parity. So, please examine the “getty
default” file carefully, and make sure the terminal settings is the same.
Otherwise, garbled data will be inevitable.
Advanced Configuration
This is to provide advanced settings for advanced driver features beyond basic
settings described in the previous Basic Configuration. Similarly, in “Board
Settings” dialog, board reset utility (described later) is available for the latest
configuration to take effect without kernel rebuilding and system reboot.
1. In the “Advanced Board Configuration” dialog, you can press Enter in each field
to select the desired option. The fields are detailed as follows.
On Board Line Discipline
Advanced feature is set to “Enable” by default, which means all the tty line
discipline jobs, e.g. translating NL to CR, will be done on C218Turbo board
(Terminal mode), instead of doing them on host. This will reduce the host
workload significantly. If it is set to “Disable”, the tty line discipline will either
be done on host (Terminal mode) or be not done at all (Transparent mode).
Please refer to “Feature” field in the “Advanced Port Settings” dialog on next
page.