User`s manual

Moxa Managed Ethernet Switch/Extender Featured Functions
3-66
NOTE
The Traffic
-Overload, Traffic-Threshold (%), and Traffic-
Duration (sec.) Port Event items are related. If you
Enable the Traffic
-Overload event, then be sure to enter a nonzero Traffic-
Threshold percentage, as well as a
Traffic
-Duration between 1 and 300 seconds.
NOTE
The sender of warning
e-mail messages will have the following form:
Managed-Redundant-Switch-00000@Switch_Location
where Managed
-Redundant-Switch-00000 is the default Switch Name, 00000 is the Moxa switch’s serial
number, and Switch_Location is the default Server Location. Refer to the Basic Settings section to see how to
modify Switch Name and Switch Location.
Configuring Email Settings
Mail Server IP/Name
Setting Description Factory Default
IP address The IP Address of your email server. None
SMTP Port
Setting Description Factory Default
SMTP port Display the SMTP port number 25
Account Name
Setting Description Factory Default
Max. 45 of charters Your email account. None
Password Setting
Setting Description Factory Default
Disable/Enable to
change password
To reset the password from the Web Browser interface, click
the Change password check-box, type the Old password, type
the New password, retype the New password, and then click
Activate (Max. of 45 characters).
Disable
Old password Type the current password when changing the password None
New password Type new password when enabled to change password; Max.
45 characters.
None
Retype password If you type a new password in the Password field, you will be
required to retype the password in the Retype new password
field before updating the new password.
None