User's Manual

Installing MOXA EtherDevice Switch
MOXA EtherDevice Switch Hardware Installation Guide
2
-
3
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should already be fixed to the
back panel of EDS-508 when you take it out of the box. If you need to
reattach the DIN-Rail attachment plate to EDS-508, make sure the stiff
metal spring is situated towards the top, as shown in the figures below.
STEP 1:
Insert the top of the DIN-Rail
into the slot just below the stiff
metal spring.
STEP 2:
The DIN-Rail attachment unit
will snap into place as shown
below.
To remove EDS-508 from the DIN-Rail, simply reverse Steps 1 and 2
above.