User`s manual

UC-8410/8416/8418/8430 Managing Communication
4-14
# other accounts that should not be able to use pppd!
guest hostname “*” -
master hostname “*” -
root hostname “*” -
support hostname “*” -
stats hostname “*” -
“[e-mail]” is the username obtained from the ISP to log in to the ISP account. “password”
is the corresponding password for the account.
5. Edit the file /etc/ppp/options and add the following line:
plugin pppoe
192.168.3.127 – PuTTY
# Wait for up n milliseconds after the connect script finishes for a valid
# PPP packet from the peer. At the end of this time, or when a valid PPP
# packet is received from the peer, pppd will commence negotiation by
# sending its first LCP packet. The default value is 1000 (1 second).
# This wait period only applies if the connect or pty option is used.
#connect-delay <n>
# Load the pppoe plugin
plugin /lib/rp-pppoe.so
# ---<End of File>---
6. Add one of two files: /etc/ppp/options.eth0 or /etc/ppp/options.eth1. The choice depends on which
LAN is connected to the ADSL modem. If you use LAN1 to connect to the ADSL modem, then add
/etc/ppp/options.eth0. If you use LAN2 to connect to the ADSL modem, then add
/etc/ppp/options.eth1. The file context is shown below:
192.168.3.127 – PuTTY
name [e-mail]
mtu 1492
mru 1492
defaultroute
noipdefault
Type your username (the one you set in the /etc/ppp/pap-secrets and /etc/ppp/chap-secrets files)
after the “name” option. You may add other options as desired.
7. Set up DNS.
If you are using DNS servers supplied by your ISP, edit the file
/etc/resolv.conf by adding the following lines of code:
nameserver ip_addr_of_first_dns_server
nameserver ip_addr_of_second_dns_server
For example:
nameserver 168.95.1.1
nameserver 139.175.10.20