User`s manual

WE-2100T Series User’s Manual Using Network Enabler Administrator
12-7
Broadcast Search
Description
This identifies all modules on the LAN and places them in the target module list
for the Configuration function. Since this search is based on MAC address,
rather than IP address, it will be able to find units that are not on the same
subnet as your PC. You may click Stop as soon as your module is found.
Specify by IP Address
Description
This allows you to add a module to the target module list by entering its IP
address.
Unlock
Description
This allows you to gain access to a module that is protected by a password. It
will prompt you for the module's password.
If the correct password is provided, the module’s status will be updated to
“Unlock”.