User's Manual

Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative 5% to 95% (non-condensing)
Humidity
Power Requirements
Input Voltage 9 to 30 VDC
Input Current 1.3 A @9 VDC, 0.39 A @30 VDC
Connector 3-pin removable terminal block, 500 V insulation
Power Consumption 11.7 W
Reverse Polarity Present
Protection
Standards and Certifications
Safety UL 60950-1, EN 60950-1
EMC EN 61000-6-2/61000-6-4
EMI CISPR 22, FCC Part 15B Class B
EMS IEC 61000-4-2 ESD: Contact 8 kV; Air 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power 2 kV; Signal 1 kV
IEC 61000-4-5 Surge: Power 2 kV; Signal 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Radio EN 301 489-1/17, EN 300 328, EN 301 893, MIC,
FCC ID SLE-1137C, WPC, ANATEL, KC, RCM,
SRRC
Note: Check Moxa’s website for the most up-to-date certification status.
Reliability
MTBF 1,125,942 hrs
Warranty
Warranty Period 5 years
Details See www.moxa.com/support/warranty.aspx
ATTENTION
• The AWK-1137C is NOT a portable mobile device and should be
located at least 20 cm away from the human body.
• The AWK-1137C is NOT designed for the general public. A
well-trained technician is required to deploy AWK-1137Cs
and safely establish a wireless network.
ATTENTION
Use the antennas correctly: The 2.4 GHz antennas are needed
when the AWK-1137C operates in IEEE 802.11b/g/n. The 5 GHz
antennas are needed for operation in IEEE802.11a/n. Make
sure that the antennas are installed in a safe area, which is
covered by a lightning protection or surge arrest system.
- 15 -