User's Manual

Mounting Dimensions
Unit = mm (inch)
DIN-Rail Mounting
The aluminum DIN-rail attachment plate comes attached to the back
panel of the AWK-1137C when you take it out of the box. If you need
to reattach the DIN-rail attachment plate to the AWK-1137C, make
sure the stiff metal spring is situated towards the top, as shown in the
figures below:
STEP 1:
Insert the top of the DIN rail
into the slot just below the stiff
metal spring.
STEP 2:
Gently push the device towards the DIN
rail until the DIN-rail attachment unit
snaps into place as shown below:
To remove the AWK-1137C from the DIN rail, reverse steps 1 and 2.
Wall Mounting (Optional)
For some applications, it may be more convenient to mount the
AWK-1137C to a wall, as illustrated below:
- 6 -