User Manual

ioThinx 4500 (45M) Module Series Hardware Installation
3-14
Mounting the Module
Take the following steps to mount the device on or unmount the device from a DIN rail.
DANGER
Never install the device whe
n the power source is switched on!
Installing the I/O Module on the DIN Rail
Step 1: Align the I/O module side by side with the head/CPU module, making sure that the upper and lower
rails are hooked together.
Step 2: Align the I/O module side by side with the network module and then push the I/O module until it
touches the DIN-rail. Next, apply more force until the module clips to the DIN-rail.
NOTE
After the module is firmly attached to the DIN
-rail, the module connections to the internal bus will be
established.