ioThinx 4500 (45M) Module Series Quick Installation Guide Version 1.1, July 2019 Technical Support Contact Information www.moxa.
Package Checklist • • 1 x ioThinx 4500 (45M) module 1 x quick installation guide (printed) Installation Installing a 45M Module on a DIN Rail Step 1: Align the 45M module side by side with the head/CPU module, making sure that the upper and lower rails are hooked together. Step 2: Align the 45M module side by side with the head/CPU module and then push the 45M module until it touches the DIN rail. Next, apply more force until the module clips to the DIN rail.
Removing a 45M Module from a DIN Rail Step 1: Use your finger to lift the release tab on the lower part of the module. Step 2: Push the top of the release tab to latch it, and then pull the module out. NOTE Electrical connections for the internal bus will be disconnected when removing the 45M module. WARNING Be sure the power is off before removing modules to avoid damaging the equipment.
Installing the Covers on the First and Last Module Attach the covers to the first and last module to cover the modules' contacts. NOTICE Be sure to attach the covers to provide electrostatic discharge protection. Horizontal Installation Before installing the device, make sure there is enough space between the device and nearby items (walls, other devices, etc.) to ensure proper heat dissipation.
LED Indicators Labeling Status Indication Status I/O Channel Channel Status Description Green: Module ready Green Slow Blinking: Booting up Green Fast Blinking: Locating Red: Module error Red Slow Blinking: Upgrading firmware Red Fast Blinking: Safe mode (output module only) Off: Power off Please refer to the ioThinx 4500 Series User’s Manual Module Configuration Please refer to the ioThinx 4500 Series User’s Manual.
