Installation Guide

- 2 -
Overview
The MGate 5134 is an industrial Ethernet gateway for Modbus
RTU/ASCII/TCP and PROFINET network communications.
Package Checklist
Before installing the MGate 5134, verify that the package contains the
following items:
• 1 MGate 5134 gateway
• Quick installation guide (printed)
• Warranty card
NOTE
Please notify your sales representative if any of the above
items is missing or damaged.
Optional Accessories (can be purchased separately)
• Mini DB9F-to-TB: DB9 female to terminal block connector
• WK-25: Wall-mounting kit, 2 plates, 4 screws, 25 x 43 x 2 mm
Hardware Introduction
LED Indicators
LED
Color
Description
PWR 1, PWR 2
Green
Power is on.
Off
Power is off.
Ready
Off
Power is off.
Green
Steady: Power is on, and the MGate is
functioning normally.
Blinking (1 sec.): The MGate has been
located by the Moxa utility DSU Location
function.
Red
Steady: Power is on, and the MGate is
booting up.
Blinking slowly (0.5 sec.): Indicates an IP
conflict, or the DHCP server is not
responding properly.
Flashing quickly Blinking (0.1 sec.): the
microSD card failed.
PROFINET I/O
Device
Off
No connection with PROFINET I/O controller.
Green
Steady: PROFINET I/O is exchanging data,
and Controller is in RUN mode.
Blinking (1 sec.): PROFINET DCP flash LED.
Red
Steady: Incorrect slot configuration.
Blinking (1sec.): One or more connections
timed out or in STOP mode.
Modbus
RTU/ASCII/TCP
Client
Off
No communication with the Modbus device.
Green
Steady: Normal communication in progress.
Red
Blinking (1 sec.): Communication error.
1. The Modbus slave device returned an
error (exception).
2. Received a frame error (parity error,
checksum error).