Installation Guide

- 10 -
LED Indicators
The front panel of the AWK-1151C contains several LED indicators. The
function of each LED is described in the table below:
LED
Color
State
Description
Front Panel LED Indicators (System)
PWR Green
On
Power is being supplied.
Off
Power is not being supplied.
SYSTEM
Red On
System initialization failure,
configuration error, or system error.
Refer to the AWK-1151C Series User
Manual for more details.
Green On
System startup completed and is
operating normally.
WLAN
Green
On
Client/Client-Router/Slave has
established a Wi-Fi connection to an
AP/Master with a SNR value of 35 or
higher.
Blinking
Data is being transmitted over the
WLAN interface.
Amber
On
Client/Client-Router/Slave has
established a Wi
-Fi connection to an
AP/Master with a SNR value of less than
35.
Blinking
Data is being transmitted over the
WLAN interface.
LAN LED Indicators (RJ45 Port)
LAN
Green
On
LAN port’s 1000 Mbps link is active.
Blinking
Data is being transmitted at 1000
Mbps.
Off
LAN port’s 1000 Mbps link is inactive.
Amber
On
LAN port’s 10/100 Mbps link is active.
Blinking
Data is being transmitted at 10/100
Mbps.
Off
LAN port’s 10/100 Mbps link is
inactive.
Specifications
Input Current
9 to 30 VDC, 1.57 to 0.47 A
Input Voltage
9 to 30 VDC
Power Consumption
14 W (max.)
Operating Temperature
Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to
167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
NOTE
To meet the
standard for IP30 protection, all unused ports
should be covered with the protective caps.