Installation Guide

- 11 -
ATTENTION
The
AWK-1151C
is NOT a portable mobile device and should be
located at least 20 cm away from the human body.
The
AWK-1151C is NOT designed for the general public. To
ensure that your
AWK-1151C wireless network is safe and
configured correctly, consult a well
-trained technician to assist
with the installation process.
ATTENTION
Use the appropriate antennas for your wireless setup: Use 2.4
GHz antennas when the
AWK-1151C is configured for IEEE
802.11b/g/n. Use 5 GHz antennas when the
AWK-1151C is
configured for IEEE
802.11a/n/ac
. Make sure that the antennas
are located in an area
with a lightning and surge protection
system installed.
ATTENTION
Do not locate the antenna near overhead power lines or other
electric light or power circuits, or where it can come into
contact with such circuits. When i
nstalling the antenna, take
extreme care not to come into contact with such circuits,
because they may cause serious injury or death. For proper
installation and grounding of the antenna, refer to national and
local codes (for example, U.S.: NFPA 70; Natio
nal Electrical
Code (NEC) Article 810; Canada: Canadian Electrical Code,
Section 54).
NOTE
For installation flexibility,
you can use either antenna 1 or
antenna 2
. Make sure the antenna connection matches the
antenna
s configured in the AWK-1151C web interface.
To protect the connectors and RF module, all radio ports should
be terminated by either an antenna or a terminator.
We
strongly recommend using resistive terminators for terminating
the unused antenna ports.
Software Setup
This section covers the software setup for the AWK-1151C.
How to Access the AWK
Before installing the AWK device (AWK), make sure that all items in the
package checklist are provided in the product box. You will also need
access to a notebook computer or PC equipped with an Ethernet port.
• Step 1: Connect the AWK to an appropriate DC power source.