Installation Guide

- 8 -

Installations with Cable Extended Antennas for Outdoor

Applications

If an AWK device or its antenna is installed in an outdoor location,

proper lightning protection is required to prevent direct lightning strikes

to the AWK device. In order to prevent the effects of coupling currents

from nearby lightning strikes, a lightning arrester should be installed as

part of your antenna system. Ground the device, antenna, as well as

the arrester properly to provide maximum outdoor protection for the

device.

Arrester Accessories

• SA-NMNF-02: Surge arrester, N-type (male) to N-type (female)

• SA-NFNF-02: Surge arrester, N-type (female) to N-type (female)

Terminal Block Pin Assignment

The AWK-1151C comes with a 3-pin terminal block located on the front

panel of the device. The terminal block contains the power input and

functional ground. Refer to the following figure and table for the

detailed pin assignment.

Definition

DC Power Input 1

Functional GND