User's Manual

AirWorks AWK-4121 User’s Manual Web Console Configuration
Operation mode
Setting Description Factory Default
AP AWK-4121 plays a role of wireless
AP/ Bridge.
Client AWK-4121 plays a role of wireless
AP Client.
AP
NOTE
When you switch to Client mode, you can find an additional Site Survey button on this page. It
can support site survey and pop up a dialog box listing the information of available APs, as
shown in the following figure. You can click on the SSID of an entity and bring the value of its
SSID onto the SSID field of the Basic Wireless Settings page. Clicking on the Refresh button
will re-scan and update the table.
NOTE
If the Gateway field in Basic Settings > Network Settings is empty, a warning message will
appear, reminding you to set the default gateway when Client mode is enabled. You can ignore
this message if you are only planning a local network and no packets will be sent outside the
network.
3-10