User's Manual

AirWorks AWK-4121 User’s Manual Web Console Configuration
WPA/WPA2-Enterprise (for AP mode)
By selecting WPA type as Enterprise, you can use EAP (Extensible Authentication Protocol), a
framework authentication protocol used by 802.1X to provide network authentication. In these
Enterprise-level security modes, a back-end RADIUS (Remote Authentication Dial-In User
Service) server is needed if IEEE 802.1X functionality is enabled in WPA /WPA2. The IEEE
802.1X protocol also offers the possibility of carrying out an efficient connection authentication in
a large-scaled network. It is not necessary to exchange keys or passphrases.
WPA type
Setting Description Factory Default
Personal Provides Pre-Shared Key-enabled
WPA and WPA2
Enterprise Provides enterprise-level security
for WPA and WPA2
Personal
Encryption method
Setting Description Factory Default
TKIP Temporal Key Integrity Protocol is
enabled
AES Advance Encryption System is
enabled
Mixed Provides for both TKIP and AES
TKIP
Primary/ Secondary RADIUS server IP
Setting Description Factory Default
The IP address of
RADIUS server
Specifies the delegated RADIUS
server for EAP
None
Primary/ Secondary RADIUS port
Setting Description Factory Default
Port number Specifies the port number of the
delegated RADIUS server
1812
Primary/ Secondary RADIUS shared key
Setting Description Factory Default
Max. 31 characters The secret key shared between AP
and RADIUS server
None
3-16