User's Manual

AirWorks AWK-4121 User’s Manual Web Console Configuration
Beacon Interval (for AP mode only)
Setting Description Factory Default
Beacon Interval
(40-1000 ms)
This value indicates the frequency
interval of the beacon
100 (ms)
DTIM Interval (for AP mode only)
Setting Description Factory Default
Data Beacon Rate
(1-16384)
This value indicates how often the
AWK-4121 sends out a Delivery
Traffic Indication Message
1
Fragment threshold
Setting Description Factory Default
Fragment Length
(256-2346)
This parameter specifies the
maximum size a data packet before
splitting and creating another new
packet
2346
RTS threshold
Setting Description Factory Default
RTS/CTS Threshold
(256-2346)
This setting determines how large a
packet can be before the Access Point
coordinates transmission and
reception to ensure efficient
communication
2346
NOTE
You can refer to the related glossaries in Chapter 5 for more detailed information about the
above-mentioned settings. By setting these parameters properly, you can better tune the
performance of your wireless network.
WLAN Certification Settings (for EAP-TLS in Client mode only)
When EAP-TLS is used, a WLAN Certificate will be required at the client end to support
WPA/WPA2-Enterprise. The AWK-4121 can support the PKCS #12, also known as Personal
Information Exchange Syntax Standard, certificate formats that define file formats commonly used
to store private keys with accompanying public key certificates, protected with a password-based
symmetric key.
Current status displays information for the current WLAN certificate, which has been imported
into the AWK-4121. Nothing will be shown if no certificate is available.
Certificate issued to: shows the certificate user
3-21