User's Manual

AirWorks AWK-4121 User’s Manual Web Console Configuration
You can also assign a static IP address to a specific client by entering its MAC address. The
AWK-4121 provides a Static DHCP mapping list with up to 16 entities. Be reminded to check the
Active check box for each entity to activate the setting.
You can check the IP assignment status under Status > DHCP Client List.
DHCP server (AP only)
Setting Description Factory Default
Enable Enables AWK-4121 as a DHCP server
Disable Disable DHCP server function
Disable
Default gateway
Setting Description Factory Default
IP address of a default
gateway
The IP address of the router that
connects to an outside network
None
Subnet mask
Setting Description Factory Default
subnet mask Identifies the type of sub-network
(e.g., 255.255.0.0 for a Class B network,
or 255.255.255.0 for a Class C network)
None
Primary/ Secondary DNS server
Setting Description Factory Default
IP address of Primary/
Secondary DNS server
The IP address of the DNS Server
used by your network. After entering
the DNS Server’s IP address, you can
use URL as well. The Secondary
DNS server will be used if the
Primary DNS server fails to connect.
None
3-23