User's Manual

AirWorks AWK-4121 User’s Manual Web Console Configuration
Power events Event is triggered when…
Power 1/2 transition (On -> Off) The AWK-4121 is powered down in PWR1/2.
PoE transition (On -> Off) The AWK-4121 is powered down in PoE.
Power 1/2 transition (Off -> On) The AWK-4121 is powered via PWR1/2.
PoE transition (Off -> On) The AWK-4121 is powered via PoE.
DI events Event is triggered when…
DI1/2 transition (On -> Off) Digital Input 1/2 is triggered by on to off transition
DI1/2 transition (Off -> On) Digital Input 1/2 is triggered by off to on transition
Syslog
This function provides the event logs for the Syslog server. The function supports up to three
configurable Syslog servers and Syslog server UDP port numbers. When an event occurs, the
event will be sent as a Syslog UDP packet to the specified Syslog servers.
Syslog Event Types
Detail information for the grouped events is shown in the following table. You can check the box
for Enable log to enable the grouped events. All default values are enabled (checked). Details for
each event group can be found on the “System log Event Types” table on page 3-31.
Syslog Server Settings
You can configure the parameters for your Syslog servers in this page.
Syslog server 1/ 2/ 3
Setting Description Factory Default
IP address Enter the IP address of the 1st/ 2nd/
3rd Syslog Server
None
3-32