User's Manual

AirWorks AWK-4121 User’s Manual Introduction
Overview
The AWK-4121 outdoor wireless AP/bridge/client is an ideal 3-in-1 solution for industrial
applications that are hard to wire, too expensive to wire, or use mobile equipment that connect to a
TCP/IP network.
The AWK-4121 is rated to operate at temperatures ranging from -40 to 75°C, and its dust-tight and
weatherproof design is IP67-rated. An IP67 rating means the device is completely protected from
dust and is protected against the effects of immersion in water between 15cm and 1m in depth.
This means you can set up a WLAN or extend existing wired networks to outdoor locations and
still maintain a reliable connection. The AWK-4121 has two redundant DC power inputs for
increased reliability, can be powered via PoE, and is easy to deploy.
Package Checklist
Moxa’s AWK-4121 is shipped with the following items. If any of these items is missing or
damaged, please contact your customer service representative for assistance.
y 1 AWK-4121
y 2 Omni-directional antennas (5dBi, N-type male, 2.4 GHz)
y 1 Quick Installation Guide
y 1 Software CD
y 1 Moxa Product Warranty Booklet
y 1 Accessory Pack (including wall-mounting kit, screws and RJ45 field installable plug)
NOTE
The above items come with the AWK-4121 standard version. The package contents may vary in
different customized versions.
Product Features
y IEEE802.11a/b/g Compliant
y Three-in-one design (AP/Bridge/Client)
y Advanced Wireless Security:
¾ 64-bit and 128-bit WEP/WPA/WPA2
¾ SSID Hiding/IEEE 802.1X/RADIUS
¾ Packet access control & filtering
y STP/RSTP support for redundancy of system networking
y RS-232 console management
y 2DI+1DO for on-site monitoring and warming
y Free firmware update for more advanced functions
y Operating temperature ranges from -40 to 75℃
y Power input by redundant 24 VDC power inputs or Power over Ethernet
y Wall mounting ability
1-2